Welding Supplies > Welding Wire and Electrodes

Welding Wire and Electrodes

MIG welding is a process that uses a continuous welding wire feed and gas mixture to protect the weld from contamination. TIG Welding uses a non-consumable tungsten electrode, which is then typically cooled and protected with Argon.

Here at WIRS we offer a wide range of products in this category such as SUPAWELD Mild Steel Mig Wire, Hyundai Solid Wire and ESAB Aluminium MIG Wire 5356 etc, everything for your welding needs. Below is some of our best sellers for our Welding Wire and Electrodes category, many others available so please contact us with your query.

SUPAWELD Mild Steel Mig Wire

Our own brand of Mild steel welding wire manufactured to offer maximum performance. Suitable for use with CO² or Argon / CO² gas mix and MIG welders

*Available in 0.8mm, 1.0mm, 1.2mm

Hyundai Solid Wire

WIRS are currently the only supplier of Hyundai Solid Wire in the UK! They are available from all three of our West Midlands based branches too!

WIRS offer a great range of Hyundai Welding Wires including their Hyundai Solid Wire. Designed for all position welding by short-circuiting type transfer and as the deposition efficiency is high and penetration is deep, highly efficient welding can be performed. 

Click here to see our Hyundai Solid Wire page

ESAB Aluminium MIG Wire 5356

OK Autrod 5356 is the most widely used welding alloy and can be classified as a general-purpose type filler alloy. OK Autrod 5356 is typically chosen because of its relatively high shear strength. The 5XXX alloy base material, welded with OK Autrod 5356, with a weld pool chemistry greater than 3% Mg and service temperatures in excess of 65°C, is susceptible to stress corrosion cracking. The alloy is non-heat treatable

*Various Sizes Available

ESAB Aluminium MIG Wire 4043

OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classified as a general-purpose filler alloy. The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodising. Non-heat treatable.

*Various Sizes Available

ESAB Aluminium TIG Wire 5356

ESAB 5356 Tig is a non-heat treable solid aluminium wire for moderate high strength applications. Principle alloy elements include Magnesium, Manganese, Chromium and Titanium.

*Various Sizes Available

ESAB Aluminium TIG Wire 4043

OK Tigrod 4043 is one of the most widely used welding alloys. It is used for welding AlMgSi types and AlSi alloys with up to 7% silicon. Not recommended for anodising. Non-heat treatable.

*Various Sizes Available

Stainless Steel Tig Wire - 308/309/316

We can offer the ESAB Brand on all the grades for stainless less steel tig wire. The Esab Tigrod 316L has a good general corrosion resistance, particularly against corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended where there is a risk of intergraular corrosion. The alloy is widely used in the chemical and food processing industries as well as in shipbuilding and various types of architectural structures.

*Various Sizes Available

BOHLER 6013 Mild Steel Electrodes

Mild Steel electrode with good Weldability in all positions including vertical down. Excellent gap bridging and arc-striking ability. For tack welding and load fit ups. General purpose for industry and trade, assembly and shop welding, repair & maintenance.

*Available in 2.5mm , 3.2mm , 4.0mm

ELGA P51 7018 Electrodes

ELGA P 51 is a low hydrogen AC/DC electrode designed for welding mild and higher strength steels. It combines strength and toughness and is particularly suitable for heavily restrained sections where there can be a risk of cracking due to weld stresses. With its excellent general operability and good positional welding characteristics p 51 is often used for pipe welding. It operates without difficulties on both primer treated and rusty material. This together with the exceptional good slag detachability, even in root runs, gives P 51 superior radiographic quality.

*Various Sizes Available

ELGA 6013 P45S Electrodes

P45S is a multi-purpose rutile-cellulosic coated electrode suitable for a wide application range in mild steel. The electrode is fully positional, including vertical down and welds with a crisp, steady arc to produce a smooth bead surface with good slag detachability.

ELGA Cromarod Stainless Steel Electrodes

Cromarod is a rutile flux coated AC/DC electrode intended for welding the low carbon, molybdenum alloyed, acid resisting austenitic stainless steels of similar composition. Operability is excellent with a smooth low spatter arc producing an exceptionally good weld bead appearance. Fillet welds have a smooth surface, slightly concave profile with excellent toe line blend-in and a self-releasing slag

Grades Available:, 312 , 308L, 309L, 316L

BIG BRANDS

3m
esab
kemppi
hyundai
miller
sia
nederman
abicor-binzel
bohler-welding

CALL 01902 712525
For all your welding requirements

Sales Stocking a range of products from leading manufacturers such as Miller, 3M and Binzel to name a few. Hire Stocking a range of products from leading manufacturers such as Miller, 3M and Binzel to name a few Repair and Service Centre Purpose built test centre with on-site technically trained technicians. Apply for credit.

Widely known throughout the UK as a leading National stockist and distributor of welding equipment and consumables from leading manufactures, WIRS are also specialists in welding machine repair, servicing, calibration / validation and hire. As a quality approved company (BSEN ISO 9001:2015) our customers know they can rely on us as their preferred supplier for all welding equipment, consumables and associated products. Buy with confidence from our specialist team at WIRS.

Our extensive stock, of over 3,500 product lines, is housed in our own warehouse. This means we supply direct to our customers without having to rely on 3rd party companies and can take full responsibility to deliver our services, on time and at the right price.

At WIRS our team put the customer first. Our success is built on the ongoing rapport we have with welding specialists throughout the Midlands. We maintain this by ensuring a fast, reliable, cost effective all round service, supplying a full range of welding supplies and equipment including machines, ppe clothing and consumables.

w

Your Cart

You are £65.00 away from free shipping.

Cart is empty

Subtotal
£0.00
0